Why is the speedometer on my 96 Polo not working?

The spedometer in my 96 Polo 1.4 has stopped working. The needle stays at 0 and the odometer doesn’t tick up. Everything else in the cluster seems to work, including the tach.

Where is the speedometer located on a VW?

For all Volkswagen cars sold in North America, speed sensors for the speedometer operate off the front wheels. You will find these sensors behind the engine and above the trans-axle. Remove a connecting hose, the air clear, and connector above the sensor — then remove the bolts keeping the sensor in place.

Why is the fuel gauge not working on my polo?

According to my haynes book, the earthing connections for both the speedo and the fuel gauge share a common point. This could explain your problems. It is a 6MM stud located on the engine head near the distributor on the cabin side. there are 2 wires connected to this stud.

What to do if your speedometer is not working?

To take it out, remove anything holding it in and pull it through the passageway under the dash. Once removed, you can replace it with a new one and install it the opposite way you took the old one out — this is a relatively easy project that can be completed by people without mechanical skills.

How does a speedometer work on a VW?

A speedometer is a valuable instrument that shows the driver real time readings of the speeds of their Volkswagen. While most modern VW’s use speed sensors to determine speed, some older vehicles used gears and wires for the speed reading.

Is there a problem with my VW Polo SE?

Volkswagen Polo SE has a problem with steering locking – Answered by a verified Auto Mechanic We use cookies to give you the best possible experience on our website. By continuing to use this site you consent to the use of cookies on your device as described in our cookie policyunless you have disabled them.

Why is my speedometer on my car not working?

Erratic speedometer readings: There are people who experience a speedometer that doesn’t settle or moves between speeds constantly, that’s almost always a wiring issue — most likely, it’s only the wiring that needs to be replace, or the sensor needs to be re-calibrated.

Where is the Speedo cable in a Volkswagen?

Find where the cabling enters the body of your Volkswagen’s interior — you will see a thick gauge black wire going into the instrument cluster, that’s the speedo cable. To take it out, remove anything holding it in and pull it through the passageway under the dash.