Where is the alternator on a Mitsubishi car?

Locate the alternator at the top of the serpentine belt assembly. Remove the electrical connection on the alternator using a 12 mm socket wrench. Climb under the vehicle and locate the swing pulley near the bottom of the serpentine belt assembly.

How do you remove an alternator drive belt?

Remove the alternator drive belt using a ratchet and socket to release the tension. Unfasten the oil dipstick tube guide mounting bolt using a ratchet and socket, if you have a 3.0L engine model. Then remove the dipstick tube guide. Unfasten the four water pump pulley bolts using a ratchet and socket, if you have a 2.4L engine model.

How do you disconnect a battery in a Mitsubishi?

Disconnect the battery by turning the positive terminal mounting bolt counter clockwise, using a 10 mm socket. Some older Mitsubishi models use larger bolts. Press the tension pulley arm firmly until the serpentine belt loosens. Quickly pull the loose belt out from underneath the idle pulley wheel, located at the top of the motor.

What happens if the alternator is not working?

Without the power from the alternator, your ignition system will have to depend on the battery for electrical power. If the alternator is not working, the battery will fail very quickly and the car will stop running.

How do I replace an alternator belt on a Mitsubishi Triton?

Hook that bungee cord to your hood somewhere, so that it hangs down. Hook the other end on the serpentine belt right next to the alternator pulley. If you need to prop the hood up with a stick or something to keep it up, do so. Pull up on the belt, and watch the pulleys.

What kind of engine does a Mitsubishi Galant have?

Look at later versions of the Mitsubishi Galant. Models made from 1983 to 1991 have 1.6 L, 1.8 L and 2.0 L engines. 1992 to 1998 versions may have 1.8 L, 2.0 L, 2.4 L and 2.5 L engines. Models for 1999 to 2003 add an option for a 3.0 L engine. The latest generation debuted in 2004 and may have a 2.4 L, 3.8 L or 3.8 L engine.

Where is the alternator on a Mitsubishi 3000GT?

This following was performed on a 1997 Mitsubishi 3000GT Base (SOHC). The alternator on a SOHC 3000GT and Stealth is located near the back of the engine bay near the firewall. Some owners remove it by pulling it up through the top of the engine bay near the intake plenum.

How long does it take to replace an alternator on a Dodge Stealth?

Depending on your experience level, the time required to remove and replace the alternator on a DOHC engine in a Mitsubishi 3000GT/GTO and Dodge Stealth should not exceed 2 hours. Unplug the negative cable from the battery.

Where is the alternator on a SOHC 3000GT stealth?

The alternator on a SOHC 3000GT and Stealth is located near the back of the engine bay near the firewall. Some owners remove it by pulling it up through the top of the engine bay near the intake plenum. Alternatively, you can also remove it out through the bottom of the engine bay:

How do you remove an alternator from a car?

Disconnect the wires connected to the alternator. Remove the cables on the left side of the alternator, which should be a 10mm. Remove all the bolts holding the alternator to the motor. Lower the tensioner.

Remove the ring connector, using a wrench, then unplug the second connector by pushing the locking tabs on the connector and pulling it free of the alternator. Remove the mounting bolts from the alternator with a socket and ratchet, then lift the alternator out of the engine compartment.

What kind of alternator does a Mitsubishi Galant need?

Determine which alternator your Mitsubishi Galant will need. You’ll want to be sure the new alternator is compatible with your Galant’s engine. Models made from 1969 to 1973 will have a 1.3 L or 1.5 L engine, 1973 to 1975 models have a 1.6 L engine and models made from 1976 to 1983 may have a 1.6 L, 1.85 L, 2.0 L or 2.6 L engine.

How do you change the alternator in a Mitsubishi?

Remove the two bolts from the alternator bracket using a ratchet and socket. Then remove the bracket. Unscrew the remaining alternator large mounting bolt, working from under the vehicle, using the ratchet and socket. Then remove the alternator from the engine compartment.