What is the normal coolant temperature for a 2007 Chevy Cobalt?
about 185 to 220
the normal operating of the engine should be between about 185 to 220. the cooling fan wont kick on until,223 degrees for low speed fan operation.
Where is the coolant temperature sensor located on a car?
The first item that needs to be completed after you compiled all of your tools and assets is to locate the coolant temperature sensor. In the image above, you can see that most coolant temperature sensors are located on the top, driver side of the engine. However, the location of this sensor may be different with your specific engine.
Can a bad coolant sensor cause a car to not start?
Some cars use the engine coolant temperature sensor to control the electric cooling fans. You have two separate temperature sensors for the fans, dashboard gauge, and engine management in most cars. However, if your car has a single sensor, a bad engine coolant temperature sensor may result in your fans won’t start at all.
What should coolant temp be when engine is hot?
With a good OBD2 code reader, you can also check the live data and the parameters of the CTS sensor. Check that the temperature value of the CTS is around 80-90c when the engine is hot. A lot of engine coolant temperature sensors have two wires and the sensor is controlled by Ohm.
What to do when your coolant sensor is replaced?
Properly dispose of used coolant. Step 16: Lower vehicle from jack stands. Place the vehicle back level to the ground. Once the coolant temperature sensor has been replaced, you need to start the engine, check for leaks, and refill the radiator fluid in most cases before you test drive the vehicle.
What does the coolant temperature sensor on a Chevy do?
The coolant temperature sensor on a Chevrolet engine is used by the vehicle’s computer to determine how hot or cold the coolant flowing through the engine block is at any given time, so that the computer knows how to properly run the engine.
What happens if your car coolant sensor is not correct?
Your engine is overheating: If the engine’s computer doesn’t receive the correct temperature reading, it may not slow the ignition timing and turn on the cooling fans when necessary, causing the engine to overheat. If this happens, pull off the road and shut the car off as quickly as possible, as overheating can quickly kill your engine.
How can I check the coolant level in my car?
Step 1: Start the vehicle. Let it warm up to operating temperature. Step 2: Check for leaks. Be sure to check for leaks from the radiator drain plug, petcock, or the coolant temperature sensor. Step 3: Check to see if the check engine or low coolant level light is illuminated.
What happens when the coolant temperature of an engine goes up?
Engine efficiency, power and fuel economy all improve as the engine temperature rises. Ideally, the engine will run as hot as possible without boiling its coolant or damaging its components. But a faulty engine coolant temperature (ECT) sensor can cause havoc on an engine or its related systems.