What is the ECU code for a Honda Integra?

ECU code: PCT. ECU Socket Type: OBD-2A(1996-1998 models) / OBD-2B(1999-2000 models) Note: This engine uses the same block as the Integra Type R (B18C5), which is taller than the B16a block (by approx 17 mm), but with a crank the same stroke as the b16a.

Is the Integra Type your engine the same as the B16A?

Note: This engine uses the same block as the Integra Type R (B18C5), which is taller than the B16a block (by approx 17 mm), but with a crank the same stroke as the b16a. It uses longer rods to accommodate for this, which is why the Rod/Stroke ratio is higher than a standard B16. Note: Only offered with SiRs with automatic transmissions.

What is the ECU code for a Honda Civic Si?

Engine codes/ECU codes Not open for further replies. P2T : 99+ OBD-? Civic Si Coupe PCX : 99+ OBD-? S2000 Not open for further replies.

How do you know if your Acura has a trouble code?

On all models, turn ignition On and observe red LED on front or top of ECU. The LED will indicate diagnostic trouble codes (DTCs) by number of flashes. In the event of a PGM-FI system malfunction, the Check Engine lamp will light and stay On. When this condition occurs, proceed as follows:

Where is the Diagnostic Code on a 1991 Acura Integra?

On all models except 1991 Integra, move front passenger seat to rear position. On 1991 Integra models, pull down passenger side carpet from under dashboard. On all models, turn ignition On and observe red LED on front or top of ECU. The LED will indicate diagnostic trouble codes (DTCs) by number of flashes.

How to get Acura Integra touchup paint codes?

LOOKING FOR MORE THAN JUST PAINT CODES AND TOUCHUP PAINT? Rosewood Brown Met. ( YR503M) Support this project by making a $5.00 donation (PayPal required) and you may download this brochure in high resolution. Your download link will appear as soon as your donation is processed.

What kind of engine does a Honda Integra B18C have?

For the B18C 98 Spec R engine, the 4-1 header was used. The power was 200 HP @ 8,000 rpm; and the torque was 186 Nm @ 7,200 rpm. This engine can be found in Honda Integra Type R. The B18C Type R engine can be identified by the red valve cover, the 4-1 header, and an intake collector. 8. B18C1 was an engine for USDM Acura Integra GSR.

What is the ECU code for a Honda B16A?

ECU code: P-fk1 (DA6/DA8/EF8), PW0 (EF8/EF9/DA6), PR3 (EF8/EF9) OBD0 JDM B16A SIR-II (Second Generation)

Is there an analog to the Honda Integra Type R?

B18C6 was a European analog to B18C Type R, which was installed in Honda Integra Type R. 14. B18C7 was an Australian analog to B18C Type R, which may be found in Honda Integra Type R. One cannot expect miracles from this very old motor, it was reliable and durable long ago, but not today.

What kind of ECU does a Honda Integra have?

PR2 – The first EDM Honda on our list, the 1988-1991 Honda ZC engine is the one that uses this PR2 ECU. PR3 – Earliest models of the Integra used this ECU, specifically the 1989-1991 Acura XSi/RSi trims.

What kind of engine does Honda DC2 Integra have?

The DC2 Integra VTi-R, however, was powered by the B18C1 engine which had a higher compression ratio (10.0:1), secondary intake butterfly valves which opened at 5800rpm and Honda’s Variable Valve Timing and Lift Electronic Control (VTEC) system which could select from two camshaft profiles for low and high RPM operations.

Is it possible to tune a Honda B18 engine?

We examine the options for your B18 tuning and point out the greatest mods that work. Honda B18s great bases for a tuning project and with a few sensible motorsport parts you can improve your driving pleasure. Some of the JDM spec versions of these B18 engines had increase compression and higher power outputs than in other markets.

What kind of ECU does a Honda EF have?

PM7 – Our first JDM Honda on this list the PM7 Honda ECU is found in the 1988-1991 Honda EF, but only in the JDM models with the ZC Engine. This ECU is a OBD0 model and will require conversion if you are stepping up to a OBD1 or OBD2 engine.