What is mode control on GM transfer case?
The dash buttons to the right of the air vent identify this system as an NVG 246 automatic two-speed, which means it has DTCs and scan tool capabilities. mode control is a set of normally open switches that vary the voltage supplied by the transfer case module when closed.
What are the fuses on a 2002 Chevy Silverado?
Repair Topics > Fuses > Chevrolet > 2002 Chevrolet Silverado… IGN A Fuse #3 40A Starter Relay, Ignition Switch IGN 1. TURN. SEO IGN Fuses PARK LP Fuse #12 30A Park Lamp Relay. Healamp and Panel Dimmer Switch Park Lamps STOP LPS Fuse #14 20A VEH STOP and CHMSL Fuses. Trailer Wiring (LH.
When to set transfer case shift control module?
If no buttons are pressed, and the transfer case shift control module detects a voltage level outside the possible range (approx. 0.5-1.0 volts) for longer than 5 minutes, the transfer case shift control module will set this DTC if a button is held down or sticks for a period longer than 5 minutes.
Where is the encoder motor on a GM transfer case?
Access to datastream information for GM’s NVG 246 system makes most problems simple to locate and diagnose, as our case studies demonstrate. These systems also allow bidirectional control for many outputs. The encoder motor (arrow) is mounted on the front of the transfer case and is used to lock it into 4WD.
Access to datastream information for GM’s NVG 246 system makes most problems simple to locate and diagnose, as our case studies demonstrate. These systems also allow bidirectional control for many outputs. The encoder motor (arrow) is mounted on the front of the transfer case and is used to lock it into 4WD.
The dash buttons to the right of the air vent identify this system as an NVG 246 automatic two-speed, which means it has DTCs and scan tool capabilities. mode control is a set of normally open switches that vary the voltage supplied by the transfer case module when closed.
When to use transfer case shift control module?
If no buttons are pressed, and the transfer case shift control module detects a voltage level outside the possible range (approx. 0.5-1.0 volts) for longer than 5 minutes, the transfer case shift control module will set this DTC if a button is held down or sticks for a period longer than 5 min- utes.
What does DTCs stand for in GM transfer case?
DTCs will stay in memory for 100 key cycles. The dash buttons to the right of the air vent identify this system as an NVG 246 automatic two-speed, which means it has DTCs and scan tool capabilities. mode control is a set of normally open switches that vary the voltage supplied by the transfer case module when closed.