What do I need to install a powered subwoofer?

Your powered sub does not come with the necessary wiring, so be sure to purchase an amp wiring kit that includes the wiring and fuses you’ll need. First, disconnect the negative battery terminal to protect you and your gear during installation. Next, run the power cable from the battery to the powered sub.

How do you connect a subwoofer to a car?

Connect the other end of the ground wire to a nearby bolt that connects to the body of the car. Connect the speaker wire to the + and – marked for speakers on the amp. There may be 2 channels. If there are 2 channels and you can bridge your amp, do it.

How long does it take to install a subwoofer in a car?

If you’re adding a subwoofer to a factory system you should definitely prepare for extra work. A good estimate is perhaps 3-5 hours or more for adding a subwoofer to an aftermarket stereo and 4.5+ hours for a factory system. The right tools make all the difference!

How is a powered subwoofer connected to an amp?

If you have a powered subwoofer, the amp’s output is internally connected to the subwoofer. If you want to ‘scope the amp’s output, you’ll have to open the case and attach the probes to the speaker terminals. I have a jl 600/6 powering 6 jl speakers. I just purchased a jl active box along with an rca splitter.

Where do you install a subwoofer?

Subwoofer Installation Tips. Typically a subwoofer is placed in the front of a room, near the front left or right main speaker. However, they can also be placed on a side wall or in back of the room. Where it sounds best will determine the final placement.

How do you install a powered subwoofer?

How to Install a Powered Subwoofer to a Factory Stereo Basic guidelines to follow to install a power subwoofer to the factory stereo system: 1. Look for a suitable place to mount the subwoofer: 2. Disconnect the battery properly: 3. Running the power wire rightfully: 4. Drive the turn-on wire and function the signal cables nicely:

What do you need to install subwoofers?

For this project, you’ll need 3/4-inch-thick medium-density fiberboard, PVA glue, screws, clamps, silicone, carpeting, a terminal cup (which is a plastic cup with terminals to connect the speaker wires to the speakers), speaker wire, and the subwoofer. For tools, you’ll need a tape measure, pencil, screwdriver, jigsaw, drill, and soldering iron.

What do I need to install subwoofers in my car?

When installing the car subwoofer in a car, the first step is to assemble all the required equipment. This could include the wiring kit, subwoofer box and the subwoofer speakers and the amplifier. Choosing the correct product is vital to the process too.