How often do you change wheel bearings on a Chevy truck?
Place the brake caliper over the brake rotor and tighten. Replace the wheels and tires and tighten using a lug wrench. Changing wheel bearings is an easy task that anyone can and should do every 80,000 miles for a Chevy truck.
Where are the wheel bearings located on a Chevy truck?
These bearings are located within the rear axle within the diameter of the brake rotors. They are held in place by a securing lock nut and packed with grease for rotating smoothly. Under the best circumstances these bearings can last hundreds of thousands of miles.
What’s the best way to replace a wheel bearing?
Step 5: Install the new bearing. Place the new bearing into the back of the rotor and apply grease to the inside bearing cavity. Install a new bearing seal over the new larger bearing and slide the rotor back on to the spindle. Tip: A rubber mallet can be used to tap the bearing seal into place.
Where to put wheel chocks when changing wheel bearings?
For example, you would place wheel chocks behind the rear tires if you are fixing a front wheel bearing and behind the front tires if you are working on a rear wheel. Loosen the lug nuts and lift the wheel using a jack. For proper access to the internal components of the wheel whose bearings you’re replacing, you’ll need to elevate the wheel.
How do you change wheel bearings on a car?
To change wheel bearings, start by lifting the wheel up on a jack, unscrewing the lug nuts, and taking the wheel off. Then, remove the brake caliper, the dust cover over the rotor, and the cotter pin and castle nut behind the dust cover. Next, pull the rotor off, remove the old hub, and take apart the hub assembly to access the wheel bearings.
How to replace rear automotive axle bearings 1 ton?
Before you begin, park your car on level ground with the transmission in park. You will need to raise up your car with a floor jack and secure it using jack stands for safety and then remove and reinstall the wheel. Remember safety first, never get under the vehicle unless jack stands are in place.
For example, you would place wheel chocks behind the rear tires if you are fixing a front wheel bearing and behind the front tires if you are working on a rear wheel. Loosen the lug nuts and lift the wheel using a jack. For proper access to the internal components of the wheel whose bearings you’re replacing, you’ll need to elevate the wheel.
Where are the bearings located in the wheel?
Usually located in the wheel’s hub, rotor, or brake drum, bearings help the wheel rotate smoothly when the vehicle moves. If you notice a humming or whirring noise while you are driving or your ABS light turns on, it may be time to change your bearings.