How do you take hinges out of Chevy Silverado?
For this step, you will need a hammer or a heavy object. All you need to do is hit the hammer on the pin and take them out of the holes. You have successfully taken out the pins of the hinges. Now, pull out the door carefully and make sure to check out the wirings of the door.
Where do the hinge pins go on a Chevy truck?
Remember that the bushings go in the vehicle part of the hinge, not the door part. With the weight of your door still on the jack, work with your assistant to align the hinges and start to slide the hinge pins into place through the bushings — bottom first, then top.
How do you remove the spring from a Chevy truck door?
Remove the door spring behind the hinge — between the hinge and the door itself — by locating the end of the spring and inserting the screwdriver between it and the hinge. Pry, using the door as leverage, until the spring pops out. Spray penetrating oil on the top and bottom of the pins, at the bushings, to make it easier to hammer the pin out.
Why are the hinges on my 1988 Chevy Silverado not working?
If you can’t close your 1988-2000 Chevrolet Silverado, Suburban or Tahoe or GMC Sierra or Yukon doors without giving them a huge slam and notice that they hang low when open, it’s time to change your door hinges. The culprit is usually the pins and bushings, which start to allow too much play in your hinges.
For this step, you will need a hammer or a heavy object. All you need to do is hit the hammer on the pin and take them out of the holes. You have successfully taken out the pins of the hinges. Now, pull out the door carefully and make sure to check out the wirings of the door.
What kind of hinges do Chevy Silverado doors have?
• The second type of door hinge is Flush Hinge, and the main motive behind the introduction of this door hinge was to make a door hinge that uses lesser space as possible. As other door hinges have the knuckle exposing to the outside of the door, but in the case of this door hinge, there is no such knuckle exposing to the outside.
When to change the hinges on a car door?
If so, change the door hinges immediately. The reason behind it is straightforward. For example, if someone is doing offroading with his car, and suddenly he hears the noise of hinges breaking into two parts, he might get into the worst situation. It’s better to keep the hinges up-tp-date and avoid any kind of mishap because of this.
How many pins are in a Dorman door hinge kit?
The bushings and pins should be press fit in several places, but aren’t. Lubricate all parts with a good, synthetic grease when assembling as all parts will be slipping on each other. Ideally the kit would contain: 2 long threaded pins, 2 short threaded pins, 4 thick washers, 4 nuts]