How do you reset the maintenance light on a Toyota Hiace?

Switch ignition OFF. Press and hold button “A”. Switch ignition ON. When display shows “000000”, wait 2 seconds and then release button “A”.

How do you turn off the oil light on a Toyota Hilux?

Press And Hold ODO/TRIP BUTTON And Push the START BUTTON to Accessory Mode. Hold ODO/TRIP BUTTON For At Least 5 Seconds Until “RESETTING OIL MAINTENANCE DATA” Is Complete Or “000000” Is Displayed.

How do you reset timing belt light on Toyota Hi ace?

Press and hold the odometer/trip display button whilst turning ignition on. Hold button down for 5 seconds then release button. Within 5 seconds, press and release the button. The display will show the reset value. Press and hold the odometer/trip button for 5 seconds then release button.

Where is the timing belt warning light on my HiAce?

There is indeed a Timing belt note on the back with two holes and one screw, and the evidence that the screw was in the other hole so my belt has been changed at least once before – which fits with the mileage! So you simply need to ease out the panel, switch the screw over and the lamp goes out until next time.

Where is the timing belt light on a 2007 Toyota Hilux?

3.0L 1KD Diesel Engine The timing belt light displayed on the dash on a 2007 Toyota Hilux diesel is reset using the following manual procedure. Turn ignition on. Make sure the Odometer/Trip meter display shows odometer information. Turn ignition switch off. Press and hold the odometer/trip display button whilst turning ignition on.

Where is the timing belt light reset point?

See GPW’s link. There are two places for the timing belt light reset point. One – like on my van is on the back of the instrument panel -where you swap a screw from one hole to another – it is well marked so there is no mistake as to what it is.

How does the timing belt reset button work?

So, the black box must have a cog attached to the worm drive (can’t see it) and the box counts six increments of the 10,000 mile digit and then triggers the light. The reset button tells it to stop counting and start again. The odometer just carries on incrementing. Is that how it works or am I barking up the wrong tree ?? Curious now . Bob.

Why does my timing belt warning light come on?

My warning light came on today at just over 120,000 miles. I had the timing belt changed at 106k so I was a bit concerned. The AA told me that the warning is linked to the odometer, rather than a sensor and that I don’t need to worry.