How do I reset my anti theft radio code?

Press the “Hour” button (or right arrow button) to set the first and second digits of the code. Release the button once the four-digit code is accurately displayed. Press the “Mode” button to lock in the code you set. Turn the stereo deck on by pressing the “Source” or “Power” button to complete the reset.

How do I unlock my Ford radio without the code?

Press and hold buttons 1 & 6 together. The radio will go through a series of information on the display, the ONLY information that will be your serial will begin “M” or “V” followed by 6 digits. If nothing shows doing this move onto the next step, this is pressing and holding down buttons 2 & 6.

How do I find the security code for my car radio?

Check Your Owner’s Manual The best place to locate a radio code is in the owner’s manual of your car. In most cases, the owner’s manual will be located in your glove box and will include general automotive service and maintenance tips, along with instructions on how to operate each system on the vehicle.

Do you need a radio code to unlock a car stereo?

A radio code is required to unlock a Vehicles factory stereo after the Vehicles battery is disconnected or replaced. The radio code is printed on a small card and included with the owner’s manual when the Vehicles is sold new.

How to unlock your Chevy or GMC radio without paying a fee?

Step 1: Start the vehicle and turn on the radio. Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Write this code down. Step 3: Press the AM/FM button. Your radio will display a second three digit code. Write the second code down. You will now have a six digit code.

How do you get the radio code on a Chevy?

Step 4: Call the Chevy Radio Code phone line at 1-800-537-5140. Enter 106010 followed by the # key to direct you to the radio code retrieval system. Step 5: Enter the six digit code you retrieved in steps 2 and 3 followed by the * key. They must be in order. You will be given a four digit radio code. Write down the radio code.

What happens when you fail to enter your radio code?

If you have activated the Theft-Deterrent feature of your radio and loose power, the radio goes into LOC (theftlock) mode. With the ignition on, you must use the MN and HR buttons to enter your personal code in order to unlock it. If you fail to enter the correct code eight (8) times, the radio goes into INOP mode.

Do you need a code to unlock your car stereo?

If you own a vehicle, you may find that the audio systems are equipped with an Anti-theft or radio code feature that requires a special “security code” to unlock your radio. This radio unlock code is not required for normal operations. It’s purpose is to deter a potential thief from removing the stereo.

Where can I find the unlock code for my Radio?

We can get your radio unlock code, but you will need to pull the radio out and get the serial number on the radio. You will need to get a set of unlock tools to pull the radio out. On the side of the radio is a 14 digit serial number that starts with VWZ.

How do I reset my anti-theft radio code?

Where do I find the radio code on my car?

Turn on radio and hold down the “AM & ARI-Z” buttons until the word “CodE” appears in display. Release buttons and 1000 appears in display. Do not touch preset #1, first digit in display corresponds to radio code.

What are the ten codes on CB radio?

In addition to law enforcement, ten-codes are frequently used on Citizens’ Band (CB) radio. One of the most frequently used ten-codes, 10-4, has become popular enough to sometimes be used in every-day language.

How to get GM Delco Radio unlock codes when display says Loc?

This system was used from the ealy 1990’s to the early 2000’s. If your radio displays the word LOC, you can retrieve a set of factory numbers in the radio that enable you to get a backup unlock code.

Where can I find the radio unlock code?

Car Radio Unlock Codes 1 Your local dealership may be able to retrieve the code by VIN or may require the serial number from the stereo. 2 The code may be located in a second location in the vehicle, see video. 3 If the stereo has been removed from the vehicle in the past, the code may have been written on the stereo by a tech.

How do you unlock a Chevy radio code?

To unlock the code, you will need this card. Turn the ignition switch on and allow your electrical system to boot up the radio. Once the word “CODE” appears on display, you can complete the next step. Enter the anti-theft or unlock code that is on the anti-theft card.

Where do I find the serial number on my Radio?

Here’s what you need to do to find your radio’s serial number: If the radio’s RDS code isn’t flashing, turn the vehicle on and turn it to “Accessory” mode. Turn on the radio and see the words “LOC” appear on the screen.