Can I replace my metal fuel lines with rubber?
Yes, you can do that. All you need is some regular hose, because 85 was either CFI which used very low pressure (13-15 psi if I remember correctly) or carbed, is like 4 psi, but no pressure before the pump… Just get flare tool kit. Flair the ends and use hose clamps.
Can you patch a rubber fuel line?
Repairing a rubber fuel line requires the right tools, supplies and knowledge. This is due to the temperature and pressure of the fuel that runs through the line. The only way to properly repair a rubber fuel line is by replacing parts of the rubber hose, or the entire hose itself.
How often should fuel lines be replaced?
Any time that you crank the car, the fuel lines will have to deliver the gas that is needed for the combustion process. The fuel lines are made to last anywhere from 50,000 to 75,000.
How do you replace a fuel line on a Chevy Duramax?
If so you need a quick disconnect tool to remove the line and your not going to like the price of the replacement from GM. another alternative is after you remove the line is to carefully cut the crimp fitting enough to remove the rubber line from the steel and the just replace the rubber part using hose clamps.
Why are my fuel lines leaking on my Duramax?
I have an 07.5 LMM and my fuel lines are leaking where the rubber hoses are crimped to the hard lines. I was wondering if anyone has replaced these and how difficult they are to change. Anything special that i need to do or any suggestions are much appreciated. Do they make a aftermarket fuel lines that are better than the stock ones.
Can a flexible fuel line replace a corroded fuel line?
Flexible Fuel Lines Replacing a corroded fuel line is often a frustrating job. Original equipment fuel lines are often difficult to re-route under the vehicle. And while braided steel fuel lines are available in pieces or in bulk, they still require significant work to get them ready for installation.
Why do Dorman stainless steel fuel lines fail?
Dorman Stainless Steel Fuel Lines come in a sectional design for easier installation and we provide all the fittings needed to complete the install quickly. Why do original Fuel Lines fail? What are the symptoms of failure? If playback doesn’t begin shortly, try restarting your device.
If so you need a quick disconnect tool to remove the line and your not going to like the price of the replacement from GM. another alternative is after you remove the line is to carefully cut the crimp fitting enough to remove the rubber line from the steel and the just replace the rubber part using hose clamps.
I have an 07.5 LMM and my fuel lines are leaking where the rubber hoses are crimped to the hard lines. I was wondering if anyone has replaced these and how difficult they are to change. Anything special that i need to do or any suggestions are much appreciated. Do they make a aftermarket fuel lines that are better than the stock ones.
Can a rubber fuel line fail aftermarket?
Any of the hoses that are rubber with metal crimped ends will eventually fail. Most switch to aftermarket, but I have no knowledge of those as I haven’t done it. Welcome to the forum. Look around and you’ll learn a lot. Do you mean the one over the fuel tank?
Which is Dorman fuel line repair kit do you use?
Read reviews for Dorman OE Solutions Fuel Line Repair Kit When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures. 5 out of 5 stars. Read reviews for Dorman OE Solutions Steel Fuel Line Rep.