What should I do if my Saturn ignition switch is not turning?

If you had to assemble the lock cylinder with the ignition switch housing, you may also need to reconnect those pieces again if the key is not turning all the way through to the ignition position. Assemble the rest of the steering column housing pieces back into place on your Saturn.

Where is the fuse on a Saturn ignition?

Open the fuse panel under the steering column by turning the knob on the fuse panel counterclockwise and pulling down on the cover. Locate the fuse for the starter in the fuse panel using the fuse diagram on the underside of the fuse panel cover. Remove the fuse using a fuse puller in the fuse box.

Can a negative battery be removed from a Saturn?

Remove the negative battery cable from your Saturn’s battery. If you want to be doubly safe, remove the positive battery cable as well. Wait for at least 15 minutes before touching any electrical parts or connections.

What to do if you have ignition switch problem?

If you are experiencing problems with your ignition key or switch, you may need a simple key reset or you could have a faulty ignition switch that needs to be replaced. Open the fuse panel under the steering column by turning the knob on the fuse panel counterclockwise and pulling down on the cover.

How does the ignition switch work on a Saturn?

Saturn vehicles use a transponder inside the ignition key to prevent unauthorized engine starting. There is a component inside the dash and linked to the ignition switch that sends a signal to the starter motor allowing the vehicle to start.

What should I do if my Saturn ignition is not working?

Turn the ignition key and try to start the engine. If the battery is known to be fully charged, the Saturn should start. If there is an error in the ignition switch, you will not hear the typical faint “click” when you initially turn the ignition key to the “III” position to crank the engine.

Can a faulty ignition switch cause a car to not start?

There is a component inside the dash and linked to the ignition switch that sends a signal to the starter motor allowing the vehicle to start. If you are experiencing problems with your ignition key or switch, you may need a simple key reset or you could have a faulty ignition switch that needs to be replaced.

Where is the starter fuse on a Saturn?

How do you replace an ignition switch on a car?

Slide the new ignition switch assembly into place, making sure you reconnect all of the necessary electrical connections and put the new ignition switch in exactly the same location as the old one was located. Tighten the bolts to securing it in place. Reconnect the negative and positive battery terminals and try your new ignition switch.

What should I do if my Saturn ignition key is not working?

Check the fuse to make sure that the metal strip inside the fuse is not broken or damaged in any way. If it is, replace the fuse with another fuse of the same amperage. Turn the ignition key and try to start the engine. If the battery is known to be fully charged, the Saturn should start.

Why is my Saturn L300 not turning on?

If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: acX4Lc9_z2BDGrEr) An error occurred while retrieving sharing information.

How do you change the ignition switch on a Saturn?

Where is the ignition switch on a Saturn?

Some Saturn models have a connection behind the ignition switch, which will be revealed only when you slide out the entire assembly. Other models have a connection below the ignition switch that can be unclipped prior to sliding out the old ignition switch assembly.

What happens when you turn the ignition key on a Saturn?

If the battery is known to be fully charged, the Saturn should start. If there is an error in the ignition switch, you will not hear the typical faint “click” when you initially turn the ignition key to the “III” position to crank the engine.

How long does it take to replace ignition switch on Saturn?

Wait for at least 15 minutes before touching any electrical parts or connections. Unscrew the steering column casings that surround the ignition switch assembly. Different models and makes require you to take off different parts to expose the steering column and the ignition switch assembly; however, doing so is a relatively easy part of the job.

What to do if you lost your Saturn keys?

by Susanne Koenig. You’ve lost or misplaced the keys to your 2002 Saturn and are understandably frustrated. Replacing them doesn’t have to be a great hassle. Since Saturn uses transponder or “coded” keys that emit a frequency specially attuned to your car’s ignition, you’ll have to order a set that will be not only cut but programmed.

Can you replace the transponder on a Saturn?

Replacing them doesn’t have to be a great hassle. Since Saturn uses transponder or “coded” keys that emit a frequency specially attuned to your car’s ignition, you’ll have to order a set that will be not only cut but programmed. A new set is as near as your Saturn dealership or a reputable automotive locksmith.

When does a Saturn’s series engine fail?

The aftermarket replacements have a quality problem; best bet is to find a low mileage junkyard replacement or order the OE part (~$70). Not hugely common, but still a recurring failure. They usually fail when the engine is hot. You’ll be driving along, and suddenly the engine dies, and won’t restart until it cools.

Can a bad ignition switch cause a car not to start?

However, if your car has ignition switch problems, you may not be able to start the car at all. Ignition switch problems can also cause issues on the road, such as unexpected shutdowns or electrical problems.

Can a worn out ignition key start a car?

Then, very carefully, tap the key until it is straight and attempt to start the car again. Factor 2: Worn out key. Keys that are worn out are actually very common, particularly on older vehicles. If your vehicle key is worn out, this will not allow the pins inside of the cylinder to drop correctly and start the car.

Where is the release pin on an ignition switch?

The new or rebuilt switch should slide easily back into its hole on the steering column. Align the shape of the cylinder and the location of the release pin with the coinciding grooves in the ignition module.

What should I do if I need to replace my ignition switch?

Reconnect the cable to the negative (-) terminal on the battery, then insert the key into the ignition and turn it to start the vehicle. The vehicle should start without any issue. If it doesn’t, remove the ignition switch and reinstall it. Shut the engine off (if it starts) and disconnect the battery again.

How do you remove a battery from an ignition switch?

Use an appropriate sized wrench to loosen the nut holding the cable on the negative (-) terminal and then slide it off the post. You don’t need to remove the positive cable from its terminal. Tuck the negative cable to the side of the battery to make sure it doesn’t accidentally come into contact with the terminals.

What to do if your key is stuck in the ignition switch?

The key may be stuck in the ignition switch, but that shouldn’t stop you from turning it. If you don’t have a key, you will need to force the module to turn using a flathead screwdriver. Press the release pin inside the hole on the ignition module with a screwdriver.

Where do I find the ignition switch on my car?

Locate the battery in the engine bay or trunk of your vehicle. It will look like a black box with a positive (+) and negative (-) post sticking out of the top of it. Use an appropriate sized wrench to loosen the nut holding the cable on the negative (-) terminal and then slide it off the post.