How many drive belts does a Pajero have?

Most Mitsubishi Pajero’s have 1 or 2 drive belts and in some instances, it may be called a serpentine belt.

How much will it cost to replace drive belt?

It provides the power necessary for the air conditioning, alternator, power steering, and the cooling system water pump. The average driving belt replacement cost is generally between $120 and $160 for the placement job, with the parts costing about $60 and the labor costing around $80.

Where can I buy new Pajero engine belts?

Buy your new engine belts from eBay, use that eBay listing and support us: 1. Turn off the engine and let it cool, You may disconnect the negative battery cable, but it is not necessary. 2. Use the 10mm socket to remove the air inlet so we’ll have access to the belts. 3.

What should I do for my Mitsubishi Pajero?

Check tires visually for defects and check their pressures. Inspect brakes – discs and pads, replace if necessary. Grease the propeller shafts joints. Change manual transmission lubricate. (3) The above maintenance plan is for a normal/light use. If you drive a lot under severe conditions, you may want to reduce that intervals by half.

How often do you change the transmission on a Pajero?

Every 2 years or 25,000 km (which ever comes first): 1 Change automatic transmission lubricate and filter (2) 2 Change manual transmission lubricate. (3) 3 Change transfer oil (4) 4 Change differentials oil (5) 5 Drain, wash and refill the cooling system (with new coolant) 6 Inspect spark plug cables 7 Replace air filter

Which is the best oil for a Pajero?

(1) Choosing the right engine oil viscosity depends on the weather in your area. For most areas, SAE 15W-40 will do the job (fits temp range from 0C to 50C), if you live in area where the temp is below 0, then you may consider SAE 10W-30, fits -20C to 40C or SAE SW-30 which works from -35 to 15C V6 petrol engine: 4.9 liters.

How do you remove the belts from a Pajero?

Release the 17mm bolt and nut at the bottom of the alternator – better access from under the car – do not remove them, just release to allow movement. 5. Release the first 14mm bolt which avoids the alternator from moving and then, use the 14mm socket to turn the long bolt till the belts will come off the alternator. 5.

How much does it cost to replace a drive belt?

The cost of having your drive belt/s replaced varies between $100 – $400+ depending on the style of drive belt/s and if other engine components need to be removed to allow access. Sorry, there was a problem loading reviews.

What to do if your timing belt has been replaced?

If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: RVgcXLRA_1Bvqpy8) An error occurred while retrieving sharing information.