What causes a Chevy blower motor to overheat?

Either of the above may cause the relay resistor module or wiring connector to overheat, resulting in one or more of the following symptoms: In very rare events, if the above symptoms are ignored, a fire could occur.

What to do if your Chevy blower motor relay blows out?

The blower motor relay on your Chevy vehicle is essential for the operation of the blower. If the relay is blown out, you will need to install a new one is soon as you can. Thankfully, it is fairly simple to tell if the relay is malfunctioning and to install a replacement.

Is there recall on GMC Duramax blower motor?

You need to find a different dealer then, it is covered as long as you don’t have over 150K miles on your truck, the recall runs from 2003-to 2007 Classic body trucks. Check somewhere else, somewhere that actually knows whats going on…

How long does a Chevy blower motor stay on?

In very rare events, if the above symptoms are ignored, a fire could occur. This special coverage covers the condition described above for a period of 10 years or 240,000 km, whichever occurs first, from the date the vehicle was originally placed in service, regardless of ownership.

Why does my GMC k1500 blower not work?

Here is a possible solution for your 1995 GMC K1500 blower that wont work on high. First remove the glove box and set it aside. Now look into the area that the glove box resided. You will see a wire harness covered in factory foam and next to this on the right you will see a flat silver box that is your ECM.

Why does my heater not work on high speed?

Heater blower motor will not work on high speed? I have replaced the black bosch relay behind the glovebox, the blower resistor and the blower motor and still cannot get the blower to work on high. I remember in older model years of gmc’s and chevys that their was a high speed blower relay that caused this issue.

What kind of blower does not work on high?

1997 GMC C1500 Heater/AC Blower Will Not Work on HIGH. 1997 GMC C1500 Heater/AC blower will not work on HIGH. I have replaced the black BOSCH relay behind the glovebox, the blower RESISTOR and the blower MOTOR and still cannot get the blower to work on HIGH.

Why is my blower motor not coming on?

With the back wire hooked up I ran a jumper directly to the battery pos and attached it the purple wire terminal on the motor. The motor did not come on. So either my motor is dead shorted or something has gummed up the brushes or they are worn out.