What kind of car is a Dodge Neon?
compact car
The Chrysler/Dodge/Plymouth Neon is a front-engine, front-wheel drive compact car that was introduced in January 1994 for model year 1995 by Chrysler’s Dodge and Plymouth divisions in two- and four-door bodystyles over two generations.
How much does a Neon car cost?
Neon Trims
| Sedan | Original MSRP / Price | Horsepower |
|---|---|---|
| Neon 4dr Sdn SE | $13,800 / $12,918 | 132 |
| Neon 4dr Sdn SXT | $16,110 / $15,020 | 132 |
What happened to the Dodge Intrepid?
What Happened To The Dodge Intrepid? The Intrepid was the four-door sedan that was only manufactured between 1993 and 2004. Popularity of the Intrepid declined over its 12-year lifespan. Now in 2020, Dodge offers consumers vehicles such as the Charger, Challenger, the Journey and more.
Is a Dodge Neon SXT a sports car?
The Neon was still faster than most competitors, with a large interior and good handling. Compared to the Corolla, the Neon is a high performance sports car.
Is there a 2020 Dodge Neon?
Three models are available for the 2020 model year. They include the entry-level SE, well-equipped Sport, and top-tier GT models. Under the hood, the 2020 Dodge Neon offers two state-of-the-art engine choices depending on the model you choose.
How much is a 2002 Dodge Neon SXT worth?
2002 Dodge Neon Value – $360-$3,415 | Edmunds.
When did the Dodge Neon come out in the US?
The Chrysler/Dodge/Plymouth Neon is a front-engine, front-wheel drive compact car introduced in January 1994 for model year 1995 by Chrysler ‘s Dodge and Plymouth divisions in two- and four-door bodystyles over two generations. Marketed in Europe, Mexico, Canada, Japan, Egypt, Australia and South America as a Chrysler,…
What makes a Dodge Neon SRT-4 special?
The Dodge Neon SRT-4 was developed by Daimler Chrysler’s Street and Racing Technology (SRT) tuner and featured a wide range of modified components as compared to the base Neon: suspension, braking system, exhaust, wheels and tires.
What kind of seats does a Dodge Neon have?
On the interior, the standard agate-colored front seats were modeled after the Dodge Viper SRT-10 seats, and featured enhanced lumbar and lateral side bolsters to stabilize occupants during performance driving. In 2004, base Neon side airbag seats were added as an option.
How much horsepower does a Dodge Neon have?
The flywheel power is estimated to be 255-265 hp (190-198 kW) and 260-270 lb-ft torque (352-366 N·m) 1⁄4 mile (400 m) time: 1⁄4 mile speed: Car and Driver magazine achieved a maximum speed of 153 mph (246 km/h).
Several questions were asked in a thread that was not in the tech section. This is for Gen 1 Dodge\Plymouth neon, 95 to 99. Re posting that information here to help any team interested in running these cars. They can be great cars for teams on a budget, many ex scca IT cars exist and there was once a class specifically for these cars (Spec Neon).
What kind of engine does a neon 2.0 have?
2.0 engines tend to pump up the head at RPM’s high enough to make the power needed to compete with the 500 point cars of today. They can also develop bottom end issues at those rpms.
Can a Dodge Neon be rebuilt to 5500 rpm?
Straight out of the junkyard you can take these motors to 5500 easily, 6k you start to limit their lifespan. I have yet to see a 2.4 stock, un-rebuilt bottom end, with the correct oil mods and reasonable tune fail when limited to 5500 rpm.
Can a PT Cruiser fit in a Dodge Neon?
We run Bassett 15″ wheels there cheep and you can pic your offset. As far as hub setup one easy upgrade is to run PT cruiser (manual Trans) front spindles and half shafts. Gives you bigger rotors and breaks. need to turn down the top of the spindle to make them fit into the neon struts. will take a hit on points for axles.
Several questions were asked in a thread that was not in the tech section. This is for Gen 1 Dodge\\Plymouth neon, 95 to 99. Re posting that information here to help any team interested in running these cars. They can be great cars for teams on a budget, many ex scca IT cars exist and there was once a class specifically for these cars (Spec Neon).
Straight out of the junkyard you can take these motors to 5500 easily, 6k you start to limit their lifespan. I have yet to see a 2.4 stock, un-rebuilt bottom end, with the correct oil mods and reasonable tune fail when limited to 5500 rpm.
2.0 engines tend to pump up the head at RPM’s high enough to make the power needed to compete with the 500 point cars of today. They can also develop bottom end issues at those rpms.
We run Bassett 15″ wheels there cheep and you can pic your offset. As far as hub setup one easy upgrade is to run PT cruiser (manual Trans) front spindles and half shafts. Gives you bigger rotors and breaks. need to turn down the top of the spindle to make them fit into the neon struts. will take a hit on points for axles.
What should I upgrade my Dodge Neon to?
As far as hub setup one easy upgrade is to run PT cruiser (manual Trans) front spindles and half shafts. Gives you bigger rotors and breaks. need to turn down the top of the spindle to make them fit into the neon struts. will take a hit on points for axles.