How do you remove a Chevy lock cylinder?

How to Change a Chevy Truck Ignition Cylinder

1. Remove the screws on the underside of the steering column cover.
2. Pull the cover down.
3. Push the punch pin up into the access hole under the ignition cylinder.
4. Pry the ignition lock out of the steering column with a flat tip screwdriver.

How do you remove a Chevy lock cylinder without the key?

Take your screwdriver and insert it into the ignition lock cylinder. Turn it as far round in a clockwise direction that you can. Then pull the paperclip to the right as much as you can. You should then be able to slide the switch out easily.

How do you unlock the steering wheel on a Cavalier?

Locking Your Steering Wheel Intentionally

1. Turn the car off and remove the keys from the ignition.
2. Turn the steering wheel in either direction until you hear a click sound.
3. When you return, you can simply follow the process mentioned earlier to unlock the steering wheel and start your car like normal.

How do you change a lock cylinder without the key?

1. Step 1: Disconnect The Battery.
2. Step 2: Remove The Steering Wheel.
3. Step 3: Remove Indicator and Wipers Switches.
4. Step 4: Remove Sleeves From Steering Column.
5. Step 5: Disconnect All Electrical Connection Leading To Ignition Switch.
6. Step 6: Remove The Mounting Bolts.
7. Step 8: Lock the Key Cylinder.
8. Step 9: Use A Screwdriver.

How do you unlock a push start steering wheel?

Push Button Start To unlock the steering wheel, depress the brake pedal and push the start/stop button while simultaneously turning the steering wheel left and right. This should unlock the steering wheel and the vehicle should start as normal.

Can you start a car with a flathead screwdriver?

Insert a flat-head screwdriver into the key hole and turn in the same direction as you would your key. This will start your car.

Can thieves break steering wheel lock?

Steering wheel locks can be defeated There have been many cases where professional thieves have stolen cars equipped with a steering wheel lock by simply cutting a portion of the steering wheel to remove the device, or by drilling or cutting the device itself to disable it.

What do I need to replace the starter on a Chevy Cavalier?

Automatic Transmission OHV 2.2L Engine Models. Cardboard Box or Carpet Mat. Floor Jack. Jack Stands. Towel. Wood Blocks. Work Gloves and Goggles. Open the hood. Vehicles around this model year usually have a hood release lever under the steering column to initiate this step.

Where are the mounting bolts on a Chevy Cavalier?

This mechanical part is only on some OHV 2.2L Engine models. If yours has it, there are 3 bolts that need to be removed from this plate. The first located face first by the starter and the second is below the starter. The other bolt is located on the other end of the plate between the oil and transaxle pan. Remove mounting bolts.

Is there an easy way to remove ignition lock cylinder?

This is an easy way to remove your ignition lock cylinder without removing the steering wheel and other covers. You have to drill a small hole in the top steering column cover to access to retaining pin on the lock cylinder. This is easily done and can be done in minutes instead of hours. Edit: somehow I merged two videos together. Loading…