Can a mass air flow sensor cause high idle?
If the computerized engine control system is faulty, high idling can be one symptom. If this tube becomes loose or broken it can leak un-metered air into the engine effectively causing an unbalance (via the mass air flow MAF sensor) in the computer system which can produce fast or slow idle.
How to diagnose a 2.3L Ford Ranger misfire?
P0304 Cylinder #4 Misfire. The engine is suffering a bona-fide misfire condition, but no misfire codes are registered in the computer’s memory (if OBD II equipped). Lack of power upon acceleration. Smell of unburned gas exiting the tail pipe. Rough idle and may stall. Cranks but does not start. Will not pass the emissions tests. Bad gas mileage.
Why does my Ford Ranger have a low rough idle?
The truck was idleling smooth and drove fine. The truck always started right up. A day maybe two after changing the plugs, I started noticing the low rough idle. As well the battery gauge would fluctuate up and down (maybe a 1/4″ of movement). However, as long as I was driving or giving it gas everything was stable.
What causes a cylinder in a Ford Ranger to go dead?
Every cylinder, needs to have air, fuel, and spark to work. If any one of these components is missing from the equation, that cylinder will go dead. This means that so many different things can cause a misfire condition (or a rough idle condition). The cause of the misfire can be in any one of the following Systems:
Is the oil gauge out on a Ford Ranger?
Also, the oil gauge will flicker like crazy occasionally at idle. The door sensor is out also if that matters. When I bought it, it idled rough, but at the appropriate rpms (650-750 in drive) but it was missing.
P0304 Cylinder #4 Misfire. The engine is suffering a bona-fide misfire condition, but no misfire codes are registered in the computer’s memory (if OBD II equipped). Lack of power upon acceleration. Smell of unburned gas exiting the tail pipe. Rough idle and may stall. Cranks but does not start. Will not pass the emissions tests. Bad gas mileage.
Why is my Ford Ranger acting like its missing?
This intermittent issue i been having on my truck is annoying me. Its hard to say when it happens (cold or warm) i believe more warm then anything, it starts acting likes a cylinder is not firing (or more cant tell). it does clear its self after about a minute or two at normal idle, if i rev the engine to 4k – 5k it clears instantly.
When does Ford Ranger 3.0 clear its self?
Its hard to say when it happens (cold or warm) i believe more warm then anything, it starts acting likes a cylinder is not firing (or more cant tell). it does clear its self after about a minute or two at normal idle, if i rev the engine to 4k – 5k it clears instantly. I have no check engine light or codes, i have checked when it happens.
Why does my 2.3L Ford Ranger have one dead cylinder?
In other words: If the engine is misfiring, the engine is simply not firing on all cylinders. Now, since the 2.3L Ford engine is a four cylinder, having just one ‘dead’ cylinder will cause an impact on engine performance and you’re gonna’ definitely feel it as you’re driving down the road or stopped at a traffic signal.