How to replace the front heater core in a car?

2 Disconnect the negative (black) battery cable. 3 Drain the coolant by twisting open the valve at the bottom of the radiator. Use a clean container that holds at least 10.5 quarts. You will reuse the coolant later. 4 Remove the panel on the lower left side of the steering column and disconnect the parking brake cable with a pair of pliers.

When did Dodge Caravan front heater come out?

Unveiled at the 2000 North American International Auto Show on January 10, 2000, the redesigned 2001 Dodge Caravan and 2001 Chrysler Town & Country were released for sale in August 2000. How to replace Front Heater Core?

How do you remove the core from a hot water heater?

Remove the plate covering the heater core (the hoses run through it) and disconnect the hoses. 16 Unclip the connectors that hold in the heater core. Lift the accelerator pedal to enable you to slide the heater core out part way. Press the brake pedal to make room to completely remove the heater core. 17 Replace the heater core.

Are there different types of front heater core?

To the best of my knowledge, there are actually 3 versions of heater core used in the 2004-2007 Caravan (Caravan, Grand Caravan) and I believe the main difference is the location of the hose connections. While I did not take photos, the only steps I needed to do on mine were:

How do you replace the heater core on a car?

Once the dash is replaced, attach the heater core hoses under the hood. (Note: Replace heater hoses and clamps if needed.) Reattach the negative battery terminal, start the engine and adjust the heater on its highest setting, refill coolant level . Allow the engine to reach operating temperature and check for leaks.

When is the best time to replace a heater core?

Best Practices Always use a quality replacement heater core. Check the condition of the heater hoses. After disconnecting the battery, allow a minimum of 10 minutes before working around the air bag system. Ensure the roundness of the heater core hose fittings to help provide a proper seal.

When to replace heater core in air bag system?

Always use a quality replacement heater core. Check the condition of the heater hoses. After disconnecting the battery, allow a minimum of 10 minutes before working around the air bag system. Ensure the roundness of the heater core hose fittings to help provide a proper seal.

Where do I remove the heater from my car?

Locate the dash mounting hardware on the left side of dash and remove them. Step 9 – Once the heater hoses have been removed, locate and remove the dashboard mounting bolts, knee bolsters and foot shields on the bottom of the dash assembly, and center console if so equipped to gain access to the heater plenum.

Why did my TDI se heater core fail?

I have the dreaded failed heater core (2014 Passat TDI SE). In addition, it caused a P2457 EGR inefficient code as well as the core supplies coolant to the EGR cooler. Couple of questions: – I purchased the car with the drive easy program extended warranty to 60K miles, I’m at 46K miles now.

https://www.youtube.com/watch?v=ZFs2MzheFC0