Is replacing a fuel pump easy?

Should you do the job yourself? Installing a fuel pump can be difficult – especially if you’ve got a full gas tank. Plus, because fuel is flammable, the task can be dangerous. If you decide to replace the fuel pump yourself, make sure to take the necessary precautions and have a fire extinguisher on hand.

How do you remove a fuel pump from an engine?

• Remove fuel pump to engine bolts and properly dispose of pump. • Remove the old mounting gasket from the engine block and clean the surface. • Inspect spacer for cracks (if required) between pump and engine block. • Some models may use a push rod to activate the pump (see figure 3 and 4).

How many steps does it take to change a fuel pump?

The job involves five different phases. First, you should relieve the system of the existing pressure inside. Then, you must remove the pump that you want to replace. Then, finish with the installation of the new one. So, let’s start now. You’ve certain things to consider before you find yourself in a good position to start.

How to mount a fuel pump to an engine?

• On models with a push rod, apply grease or petroleum jelly to hold rod in the retracted position. • Install gasket and spacer (if required) and mount fuel pump to the engine. A misaligned pump lever to push rod may damage the pump or the push rod. • Install the mounting bolts and tighten them alternately until seated.

What should I do if my fuel pump slides out?

Make sure that push rod is correctly installed in both the engine and the fuel pump. If the push rod slides out, you can pack it with some heavy grease to hold it in place while you install the pump. Attach the fuel outlet line that runs to the carburetor.

How long does it take to change a fuel pump?

The labor to replace the in tank fuel pump and the inline fuel filter that should be replaced with the fuel pump will take 4 to 5 hours labor.

How much does it cost to change fuel pump?

The average cost for a fuel pump replacement is between $669 and $914. Labor costs are estimated between $177 and $225 while parts are priced between $492 and $689.

When is it time to replace your fuel pump?

A high quality, OEM fuel pump can last indefinitely. However, as with any electro-mechanical component, a fuel pump will eventually degrade and fail. If it fails to produce adequate pressure or completely quits operating, it will need to be replaced.

How do you change the fuel pump?

Here’s how to replace the fuel pump in a gas tank for cars with a carburetor engine. Disconnect the ground cable (it’s usually black) from the battery’s negative (-) terminal. Examine the fuel line from the gas tank and replace it if it’s cracked or leaky. Release the gas tank pressure according to the instructions in the car’s service manual.