How do you reset the Pats on a Ford f150?

Locate the reset option on Your dashboard display, and press it down. Hold it for about 4 to 10 seconds, which is when You will see the word “test” appear. You should then preSSReset several times in succession, until You see the DTC. Turn off the ignition, then crank the motor.

How do I reset my Ford Focus Pats?

One way is to put the physical key in the lock, and then turn it to the unlock position. Do this, without moving it away from that unlock position for about 30 seconds. After that, You can unlock the car and start the engine. This will trigger a reset of the system.

How do you bypass the anti-theft system on a Ford f150?

How do you turn off the anti-theft system on a Ford f150?

1. Turn off the ignition and check your doors – all of them have to be closed.
2. Insert the key in the ignition and turn it to “On”.
3. Triple-push the power door unlock button.
4. Turn the key to “Off”.
5. Push the power to unlock the button 3 times again.

When to use the p1260 Ford theft code?

P1260 Ford Description. The P1260 code can be set if the Passive Anti-Theft System (PATS) has determined a theft condition existed and the engine is disabled or an engine start was attempted using a non-PATS key. This Diagnostic Trouble Code (DTC) is a good indicator to check the PATS for DTCs.

When does PATs set the error code p1260?

Specifications on the definition, troubleshooting, and repairs, of course, vary from one make and model to another. Error Code P1260 is set when the PATS (Passive Anti-Theft System) have determined a theft condition in the system which disabled the engine, or the engine will not start from a non-PATs key attempt.

What are the trouble codes for Ford Pats?

Most of the PATS trouble codes are body “B” or data “U” type codes. You must have a code reader that can read these codes. Repairing a PATS system is NOT hard. B1213 Less than 2 (or 3 if equipped w/Valet key) keys programmed to the system. B1232/B2103 Transceiver internal antenna damaged. Replace transceiver.

Can a transponder bypass the Ford PATS system?

You should only bypass the ford pats system temporarily until you get a new transponder key. Now that we are on the same page, follow the following steps to get around the ford pats system:

P1260 Ford Description. The P1260 code can be set if the Passive Anti-Theft System (PATS) has determined a theft condition existed and the engine is disabled or an engine start was attempted using a non-PATS key. This Diagnostic Trouble Code (DTC) is a good indicator to check the PATS for DTCs.

When to look for fault codes in Ford Pats?

Look for fault codes in The PATS function will store fault codes when the PCM records a P1260. Be certain of the vehicle model Use only parts & keys specified for the appropriate model year. Check to make sure the issue is not with multiple PATS keys, small electronic devices that can be used to purchase gasoline, or other items on same key ring.

When to set the diagnostic trouble code p1260?

The P1260 code can be set if the Passive Anti-Theft System (PATS) has determined a theft condition existed and the engine is disabled or an engine start was attempted using a non-PATS key. This Diagnostic Trouble Code (DTC) is a good indicator to check the PATS for DTCs.

What causes a Ford p1260 to be immobilized?

P1260 FORD Possible Causes 1 Incorrectly programmed Powertrain Control Module (PCM) 2 Incorrectly programmed Instrument Cluster (IC) or Instrument Panel Cluster (IPC) 3 Previous theft condition 4 Anti-theft system concern